Cypress CY7C0430CV Computer Hardware User Manual


 
10 Gb/s 3.3V QuadPort™ DSE Family
CY7C0430BV
CY7C0430CV
Cypress Semiconductor Corporation 198 Champion Court San Jose, CA 95134-1709 408-943-2600
Document #: 38-06027 Rev. *B Revised May 23, 2006
Features
QuadPort™ datapath switching element (DSE) family
allows four independent ports of access for data path
management and switching
High-bandwidth data throughput up to 10 Gb/s
133-MHz
[1]
port speed x 18-bit-wide interface × 4 ports
High-speed clock to data access 4.2 ns (max.)
Synchronous pipelined device
1-Mb (64K × 18) switch array
0.25-micron CMOS for optimum speed/power
IEEE 1149.1 JTAG boundary scan
Width and depth expansion capabilities
BIST (Built-In Self-Test) controller
Dual Chip Enables on all ports for easy depth expansion
Separate upper-byte and lower-byte controls on all
ports
Simple array partitioning
Internal mask register controls counter wrap-around
Counter-Interrupt flags to indicate wrap-around
Counter and mask registers readback on address
272-ball BGA package (27-mm × 27-mm × 1.27-mm ball
pitch)
Commercial and industrial temperature ranges
3.3V low operating power
Active = 750 mA (maximum)
Standby = 15 mA (maximum
Note:
1. f
MAX2
for commercial is 135 MHz and for industrial is 133 MHz.
BUFFERED SWITCH
REDUNDANT DATA MIRROR
PORT 1 PORT 3
PORT 4
PORT 2
PORT 1
PORT 2
PORT 3
PORT 4
QuadPort DSE Family Applications
[+] Feedback