Filter
Top Products
ST/SV-3210 and ST/SV-3306 15
Ticket Exit
The printed tickets are expelled from this opening.
Darkness Control
The Darkness Control will adjust the darkness of the printing on the
tickets: turning the control clockwise darkens the print and turning the
control counterclockwise lightens the print. This darkness function can
also be controlled through software commands.
Indicators
For a brief period (approximately 20 seconds) after power-up, all three
indicators will remain on while the printer performs internal diagnostics.
POWER:
Turning ‘On’ the power switch lights this indicator.
FAULT:
During normal operation, this indicator will flash briefly as
the printer receives data from the host system; however, if a
fault is detected this indicator stays on. A fault can have
several different causes; see Section 5 for details.
ON-LINE:
In the on-line mode, this indicator lights to denote that the
printer is ready to accept data. Pressing the PAUSE button
while tickets remain to print causes the indicator to flas
h
repeatedly. This indicator remains off in the off-line mode.
Dual-Purpose Buttons
Depending upon the printer’s mode, the buttons function as follows:
On-Line Mode Button Functions (the On-Line Indicator is ‘On’)
PAUSE:
Press this to temporarily stop printing (pause mode) or to
enter the off-line mode.
Press this button in pause mode to resume printing from th
e
point stopped; or, if in off-line mode press to return to the
on-line mode.
FEED:
Press this button to advance the ticket stock to the next print
position.
TEST:
This button is inactive in the on-line mode.