Filter
Top Products
ST/SV-3210 and ST/SV-3306 51
Appendix B
Available Fonts and Barcodes
All available character fonts and barcodes are listed below. The
selections will differ depending upon the parser mode setting.
Accordingly, use either the DPL Programmer’s Manual or the DTPL
Programmer’s Manual for detailed information.
DPL Fonts
Fonts 0 through 8 use the slash zero (Ø) convention for distinguishing
between the zero and the alphabetic O (the slash can be removed with the
Z ticket-formatting command). These fonts are non-proportional
(monospaced): each character will take up the same amount of space
when printed.
Font 9 (Triumvirate) is a proportional font: each character will take up a
different amount of space when printed.
Font Valid ASCII Characters
0 32-127
1 32-168, 171, 172, 225
2 32-168, 171, 172, 225
3 32, 35-38, 40-58, 65-90, 128, 142-144, 146, 153, 154,
156, 157, 165, 168, 225
4 32, 35-38, 40-58, 65-90, 128, 142-144, 146, 153, 154,
156, 157, 165, 168, 225
5 32, 35-38, 40-58, 65-90, 128, 142-144, 146, 153, 154,
156, 157, 165, 168, 225
6 32, 35-38, 40-58, 65-90, 128, 142-144, 146, 153, 154,
156, 157, 165, 168, 225
7 32-126
8 32, 48-57, 60, 62, 67, 69, 78, 83, 84, 88, 90
9 32-126, 128-169, 171-173, 181-184, 189, 190, 198, 199, 208-216,
222, 224-237, 241, 243, 246-250