Dell 1300 Network Card User Manual


 
68 Solving Problems
CHECK THE BATTERY STATUS LIGHT If the battery status light flashes orange or is a steady orange the
battery charge is low or depleted. Connect the computer to an electrical outlet.
If the battery status light flashes green and orange, the battery is too hot to charge. Shut down the
computer, disconnect the computer from the electrical outlet, and then let the battery and computer
cool to room temperature.
If the battery status light rapidly flashes orange, the battery may be defective. See “
Contacting Dell
.”
CHECK THE BATTERY TEMPERATURE If the battery temperature is below 0° C (32° F), the computer will
not start up.
TEST THE ELECTRICAL OUTLET Ensure that the electrical outlet is working by testing it with another
device, such as a lamp.
CHECK THE AC ADAPTER Check the AC adapter cable connections. If the AC adapter has a light,
ensure that the light is on.
CONNECT THE COMPUTER DIRECTLY TO AN ELECTRICAL OUTLET Bypass power protection devices, power
strips, and the extension cable to verify that the computer turns on.
ELIMINATE POSSIBLE INTERFERENCE Turn off nearby fans, fluorescent lights, halogen lamps, or other
appliances.
ADJUST THE POWER PROPERTIES See “
Power Management Modes
.”
RESEAT THE MEMORY MODULES
If the computer power light turns on but the display remains blank,
reinstall the memory modules
. See “
Memory.”
Ensuring Sufficient Power for Your Computer
Your computer is designed to use the 90-W AC adapter; for optimum system performance, you should
always use this adapter.
The 65-W AC adapters used in other Dell™ portable computers can be used with your computer, but they
will decrease system performance. Using less-powerful AC adapters, including the 65-W AC adapter, will
cause you to receive a
WARNING
message.
Printer Problems
CAUTION: Before you begin any of the procedures in this section, follow the safety instructions in the Product
Information Guide.
NOTE: If you need technical assistance for your printer, contact the printer’s manufacturer.
E
NSURE THAT THE PRINTER IS TURNED ON.
C
HECK THE PRINTER CABLE CONNECTIONS
See the printer documentation for cable connection information.
Ensure that the printer cables are securely connected to the printer and the computer.
TEST THE ELECTRICAL OUTLET
Ensure that the electrical outlet is working by testing it with another
device, such as a lamp.
book.book Page 68 Thursday, September 22, 2005 8:08 AM