Filter
Top Products
Understanding the Printer Menus 381
Initialize NVM
Purpose:
To initialize wired network data stored in NVM (non-volatile memory). After
executing this function and rebooting the printer, all wired network settings
are reset to their default values.
Fax Settings
Use the Fax Settings menu to configure the basic fax settings.
NOTE: Values marked by an asterisk (*) are the factory default menu settings.
Receive Mode
Purpose:
To select the default fax receiving mode.
Va lue s :
LLTD Disable Disables the LLTD.
Enable* Enables the LLTD.
Bonjour (mDNS) Disable Disables the Bonjour (mDNS).
Enable* Enables the Bonjour (mDNS).
No* Does not initialize the wired network data stored in NVM.
Yes Initializes the wired network data stored in NVM.
TEL Mode Automatic fax reception is turned off. You can receive a fax by
picking up the handset of the external telephone, pressing the
remote receive code, and then pressing
.
FAX Mode Automatically receives faxes.
TEL/FAX
Mode
When the printer receives an incoming fax, the external telephone
rings for the time specified in
Auto Rec TEL/FAX, and then
the printer automatically receives a fax. If an incoming call is not a
fax, the printer beeps from the internal speaker indicating that the
call is a telephone call.