Filter
Top Products
384 Understanding the Printer Menus
Resend Delay
Purpose:
To specify the interval between transmission attempts within the range of 3 to
255 seconds. The default is 8 seconds.
Redial Attempts
Purpose:
To specify the number of redial attempts to make when the destination fax
number is busy, within the range of 0 to 9. If you enter 0, the printer will not
redial. The default is 3.
Redial Delay
Purpose:
To specify the interval between redial attempts within the range of 1 to 15
minutes. The default is 1 minute.
Junk Fax Setup
Purpose:
To reject faxes sent from unwanted numbers by accepting faxes only from the
fax numbers registered in the Phone Book.
NOTE: Ensure to specify Fax Number before using Junk Fax Setup.
Remote Receive
Purpose:
Tone* Sets the dialing type to Tone.
Pulse(10PPS) Sets the dialing type to Pulse
(10 pulse per second).
Pulse(20PPS) Sets the dialing type to Pulse
(20 pulse per second).
Off* Does not reject faxes sent from unwanted numbers.
On Rejects faxes sent from unwanted numbers.