34
Solving Problems
If the power light is blinking white —
The computer is in standby mode. Press a key
on the keyboard, move the pointer on the
trackpad or a connected mouse, or press the
power button to resume normal operation.
If you encounter interference that hinders
reception on your computer — An unwanted
signal is creating interference by interrupting or
blocking other signals. Some possible causes of
interference are:
Power, keyboard, and mouse extension cables.•
Too many devices connected to a power strip.•
Multiple power strips connected to the same •
electrical outlet.
Memory Problems
If you receive an insufficient memory
message—
Save and close any open files and exit any •
open programs you are not using to see if
that resolves the problem.
See the software documentation •
for minimum memory requirements.
If necessary, install additional memory
(See the Service Manual on the Dell
Support website at support.dell.com).
Reseat the memory modules (See the • Service
Manual on the Dell Support website at support.
dell.com) to ensure that your computer is
successfully communicating with the memory.
If you experience other memory problems —
Ensure that you are following the memory •
installation guidelines (see the Service
Manual on the Dell Support website at
support.dell.com).
Check if the memory module is compatible •
with your computer. Your computer supports
DDR2 memory. For more information about the
type of memory supported by your computer,
see “Basic Specifications” on page 56.
Run the Dell Diagnostics (see “Dell •
Diagnostics” on page 40).