Filter
Top Products
Back to Contents Page
Solving Problems
Dell™ 1708FP Flat Panel Monitor User's Guide
Troubleshooting Your Monitor
General Problems
Product Specific Problems
USB Problems
Troubleshooting Your Soundbar
CAUTION: Before you begin any of the procedures in this section, follow the safety instructions.
Troubleshooting Your Monitor
Self-Test Feature Check (STFC)
Your monitor provides a self-test feature that allows you to check whether your monitor is functioning properly. If your monitor and
computer are properly connected but the monitor screen remains dark, run the monitor self-test by performing the following steps:
1. Turn off both your computer and monitor.
2. Unplug the video cable from the back of the computer. To ensure proper Self-Test operation, remove both Digital (white
connector) and the Analog(blue connector) cables from the back of computer.
3. Turn on the monitor.
NOTE: The floating 'Dell Self-test Feature Check' dialog box should appear on a black background if the monitor cannot
sense a video signal. Using the input select button, select the desired input to be tested either Analog Input or Digital
Input. Disconnect the video cable from the video card and the Dell Self-test Feature Check dialogue box will appear if
the display is operating correctly.
or
or