Filter
Top Products
Removing the Infrared (IR) Module | 149
66
Removing the Infrared (IR) Module
WARNING: Before working inside your computer, read the safety information
that shipped with your computer and follow the steps in "Before You Begin" on
page 11. After working inside your computer, follow the instructions in "After
Working Inside Your Computer" on page 13. For additional safety best practices
information, see the Regulatory Compliance Homepage at dell.com/
regulatory_compliance.
Prerequisites
1 Remove the back cover. See "Removing the Back Cover" on page 19.
2 Remove the stand. See "Removing the Stand" on page 47.
3 Remove the system-board shield. See "Removing the System-Board Shield" on
page 31.
4 Remove the trim cover. See "Removing the Trim Cover" on page 87.
5 Remove the processor heat-sink fan. See "Removing the Processor Heat-Sink Fan"
on page 75.
6 Remove the inner frame. See "Removing the Inner Frame" on page 95.
7 Follow step 1 to step 12 in "Removing the Display Panel" on page 133.
OM_Book.book Page 149 Friday, April 27, 2012 3:23 PM