Filter
Top Products
System Setup | 161
Power
Wake Up by Integrated
LAN/WLAN
If enabled, will wake the system using a network
message
AC Recovery Allows you to select the action the computer takes
when power is restored.
DeepSx Power Policies Allows you to configure the DeepSx mode.
USB PowerShare in S4/S5
State
Allows you to charge USB devices when the
computer is in S4/S5 state.
USB PowerShare in Sleep
State
Allows you to charge USB devices when the
computer is in sleep state, but the wake-up function
is disabled.
Auto Power On Allows the computer to start up automatically at a
pre-configured time.
Auto Power On Mode Allows you to set the auto power-on mode.
Auto Power On Date Allows you to set the auto power-on date.
Auto Power On Time Allows you to set the auto power-on time.
Security
Supervisor Password Displays the status of the supervisor password.
User Password Allows you to change the user password. You cannot
use the user password to enter the BIOS setup
during POST.
Set Supervisor Password Allows you to set a supervisor password.
User Access Level Allows you to set the user-access level.
Set User Password Allows you to set a user password.
Password Check Allows you to configure when the computer
prompts for passwords. (When entering system
setup or at every boot)
Exit
Save Changes and Reset Allows you to save the changes.
Discard Changes and Reset Allows you to discard the changes.
Load Default Allows you to load the default BIOS settings.
OM_Book.book Page 161 Friday, April 27, 2012 3:23 PM