Filter
Top Products
Removing the TV-Tuner Mini-Card | 63
26
Removing the TV-Tuner Mini-Card
WARNING: Before working inside your computer, read the safety information
that shipped with your computer and follow the steps in "Before You Begin" on
page 11. After working inside your computer, follow the instructions in "After
Working Inside Your Computer" on page 13. For additional safety best practices
information, see the Regulatory Compliance Homepage at dell.com/
regulatory_compliance.
Prerequisites
1 Remove the back cover. See "Removing the Back Cover" on page 19.
2 Remove the system-board shield. See "Removing the System-Board Shield" on
page 31.
Procedure
1 Disconnect the TV-in port cable from the TV-tuner mini-card.
2 Remove the screws that secure the TV-tuner mini-card to the system board.
3 Slide and remove the TV-tuner card out of the TV-tuner mini-card connector.
1 TV-in port cable 2 TV-tuner mini-card
3 TV-tuner mini-card connector 4 screws (2)
1
2
3
4
OM_Book.book Page 63 Friday, April 27, 2012 3:23 PM