Filter
Top Products
Replacing the System-Board Shield | 33
11
Replacing the System-Board Shield
WARNING: Before working inside your computer, read the safety information
that shipped with your computer and follow the steps in "Before You Begin" on
page 11. After working inside your computer, follow the instructions in "After
Working Inside Your Computer" on page 13. For additional safety best practices
information, see the Regulatory Compliance Homepage at dell.com/
regulatory_compliance.
Procedure
1 Align the screw holes on the system-board shield with the screw holes on the
computer base.
2 Replace the screws that secure the system-board shield to the computer base.
Postrequisites
1 Replace the back cover. See "Replacing the Back Cover" on page 21.
OM_Book.book Page 33 Friday, April 27, 2012 3:23 PM