Filter
Top Products
50 Installing System Components
Opening and Closing the System
The system is enclosed by an optional bezel and cover. To upgrade or troubleshoot the system, remove
the bezel and cover to access the drives and internal system components.
Removing the Bezel
Removing the Rack Bezel
1 Unlock the keylock at the left end of the bezel.
See
Figure 3-1
.
2
While grasping the bezel, press the release latch on the left edge of the bezel, adjacent to the keylock.
3
Rotate the left end of the bezel away from the front panel.
4
Unhook the right end of the bezel and pull the bezel away from the system.
See
Figure 3-1
.
Figure 3-1. Installing and Removing the Optional Bezel (Rack)
1 key lock 2 bezel (rack) 3 bezel slot (2)
1
2
3