Filter
Top Products
98 Installing System Components
3
Continue to hold the guide rails outward as you pull the SAS controller daughter card upward from the
rails.
If you need to replace the SAS daughter card battery, see "Replacing the SAS RAID Controller Daughter
Card Battery" on page 96.
Figure 3-28. Installing and Removing the SAS Controller Daughter Card
1
3
5
2
4
6
1 SAS connector 0 (out to 1x8
backplane SAS_A connector)
2 SAS connector 1 (SAS RAID
only) (out to 1x8 backplane
SAS_B connector or 1x2
SAS_B_IN connector)
3 SAS controller daughter card
4 RAID battery cable (SAS RAID
only)
5 daughter card slot socket 6 slide rails (2)