Filter
Top Products
60 Appendix I. Regulatory statement
Conformity Assessment of the Products integrating the DELL5002
The following is a supplementary explanation of conformity assessments for
final products integrating the radio modules such as the DELL5002, that
have passed conformity assessments in accordance with the R&TTE
Directive.
The procedures for conformity assessment in accordance with the R&TTE
Directive are the responsibility of the manufacturer of the final product. With
final products integrating radio modules, the person who integrates the
module in the system becomes the manufacturer of the final product, and it
is their responsibility to certify that the requirements of the R&TTE
Directive and met.
Exemption from conformity assessment
However, if radio modules that meet the requirements of the R&TTE
Directive and that have passed the conformity assessment are integrated in a
final product that follows the cautions concerning integrating radio modules,
they are exempted from the conformity assessment for R&TTE Directive
Article 3.2 (efficient use of the radio spectrum). For details, refer to the
following Guidance and ETSI Technical Report from the R&TTE
Compliance Association, and check whether your case applies.
Organization R&TTE Compliance
Association
Document No. TGN 01 Rev 3
Document title Technical Guidance Note on Requirement for a Final Product
that Integrates an R&TTE Directive Assessed Module
URL You can download the guidance from the download area of
R&TTE Compliance association.
Organization ETSI (Technical report) Document No. ETSI TR 102 070-2
Document title Electromagnetic compatibility and Radio spectrum Matters
(ERM); Guide to the application of harmonized standards to
multi-radio and combined radio and non-radio equipment; Part
2: Effective use of radio frequency spectrum
URL You can download the guidance from the ETSI web site by
entering TR102 070-2 in the search engine. Before
downloading, you will be requested to register.
http://www.rtteca.com