Filter
Top Products
Setting Up and Using Your Computer 53
8
On the
Select Member Hard Drive
screen, double-click the hard drive to
select the member drive that you want to act as the mirror in the array, and
click
Next
.
9
On the
Specify Volume Size
screen, select the volume size you want, and
click
Next
.
NOTE: In the following step, you will lose all data contained on the
member drive.
10
Click
Finish
to start migrating, or click
Back
to make changes. You can use
your computer normally during migration process.
Creating a Spare Hard Drive
A spare hard drive may be created with a RAID 1 array. The spare hard drive is
not recognized by the operating system, but you can see the spare drive from
within Disk Manager or the Intel Option ROM Utility. When a member of
the RAID 1 array is broken, the computer automatically rebuilds the mirror
array using the spare hard drive as the broken member’s replacement.
To Mark a Drive as a Spare Hard Drive:
1
Click
Start
and point to
All
Programs
→
Intel
®
Matrix Storage
Manager
→
Intel Matrix Storage Console
to launch the Intel
®
Matrix
Storage Manager.
2
Right-click the hard drive you want to mark as a spare hard drive.
3
Click
Mark as Spare
.
To Remove Spare Marking From a Spare Hard Drive:
1
Right-click the spare hard drive icon.
2
Click
Reset Hard Drive to Non-RAID
.
book.book Page 53 Monday, October 6, 2008 11:28 AM