Filter
Top Products
2 pull tab
3 boss
4 modem connector
5 modem cable
Replacing the Modem Daughter Card
1. Connect the modem cable to the modem daughter card.
NOTICE: The connectors are keyed for correct insertion; do not force the connections.
2. Using the screw hole and the boss at the opposite corner of the daughter card to align the card, press the card into its
connector on the system board.
3. Install the M2 x 4-mm screw that secures the modem to the system board.
4. Replace the memory module/modem cover and tighten the two captive screws.
Back to Contents Page