Filter
Top Products
Back to Contents Page
Palm Rest
Dell™ Latitude™ C400 Service Manual
Removing the Palm Rest
Replacing the Palm Rest
Removing the Palm Rest
NOTICE: Disconnect the computer and any attached devices from electrical outlets, and remove any installed
batteries.
NOTICE: To avoid ESD, ground yourself by using a wrist grounding strap or by touching an unpainted metal surface on
the computer.
NOTICE: Read "Preparing to Work Inside the Computer" before performing the following procedure.
1. Remove the hard drive
.
2. Remove the keyboard
.
NOTICE: You must remove the display assembly before you remove the palm rest; the display hinges pass through
the back of the palm rest.
3. Remove the display assembly
.
4. Turn the computer over and remove the four M2.5 x 6-mm screws (two screws to each side of the battery bay).
Palm-Rest Screws on Bottom of Computer