Filter
Top Products
70 Installing System Components
4 With the lever on the hard drive carrier open, slide the hard drive into
the drive bay until the carrier contacts the backplane. See
Figure 3-6.
5 Close the handle to lock the drive in place.
Removing a Hard Drive From a Hard-Drive Carrier
Remove the screws from the slide rails on the hard-drive carrier and separate
the hard drive from the carrier. See Figure 3-7.
Figure 3-7. Installing a Hot-Swap Hard Drive Into a Drive Carrier
1 hard drive 2 SAS/SATA indicator
3 drive carrier 4 screws (4)
2
1
3
4
book.book Page 70 Wednesday, May 12, 2010 9:26 PM