Filter
Top Products
Installing System Components 99
Figure 3-16. Removing and Installing an iDRAC6 Express Card
7
Reinstall all expansion cards in the expansion-card riser. See "Installing an
Expansion Card" on page 90.
8
Close the system. See "Closing the System" on page 65.
9
Reconnect the system and peripherals to their power sources, and turn
them on.
Removing an iDRAC6 Express Card
CAUTION: Many repairs may only be done by a certified service technician.
You should only perform troubleshooting and simple repairs as authorized in
your product documentation, or as directed by the online or telephone service
and support team. Damage due to servicing that is not authorized by Dell is not
covered by your warranty. Read and follow the safety instructions that came
with the product.
1
Turn off the system, including any attached peripherals, and disconnect
the system from the electrical outlet.
2
Open the system. See "Opening the System" on page 64.
1 iDRAC6 Express card 2 plastic standoff tab
3 notch 4 clip
4
2
1
3
book.book Page 99 Wednesday, May 12, 2010 9:26 PM