Filter
Top Products
fi-412PR Imprinter Operator’s Guide | 17
6. Specifications
Item Specification
Printing Method Thermal inkjet printing
Print Timing Post printing
Printing Characters
Alphabet : A to Z, a to z
Numeric Characters : 0, 1 to9
Symbols : ! ” $ # % & ’ ( ) * + , - . / : ; < = > ? @ [ \ ] ^ _` { | } ~
Maximum number of
characters per line
Maximum 40 characters
Print orientation 0º, 180º (horizontal orientation), 90º, 270º (vertical orientation)
Character size
Height 2.91mm × width 2.82mm (horizontal orientation),
Height 2.82mm × width 2.91mm (vertical orientation)
Character pitch 3.53mm
Document that can be
scanned
Documents supported by fi-4120C2
For the details, please refer to “fi-4120C2 Image Scanner Operator’s Guide”-“Chapter 6
Document Specification for the ADF.”
ATTENTION
Documents with glossy surface such as thermal paper, thermal transfer paper, coated paper,
and art paper take longer time for the ink to dry and may cause poor print quality. The imprinter
must be cleaned more frequently if you use these types of papers.
Printing area
ATTENTION
Do not print less than 5mm of
the page margins.
Dimension
Without Scanner : 300(W) × 241(D) × 146(H) mm / 11.81(W) x 9.49(D) x 5.75(H) inches
With Scanner : 303(W) × 437(D) × 277(H) mm / 11.93(W) x 17.2(D) x 10.91(H) inches
Weight 2.5kg (5.51 lbs)
Ambient condition Temperature: 10 to 35ºC (50 to 95 degrees ºF), Humidity: 20 to 80%
Consumable
Print Cartridge (P/N: CA00050-0262)
Replacement Cycle : 4,000,000 characters
(
The number of characters may decrease depending on the font selection.)
A=5mm
B=5mm
C=5mm
D=5mm
(0.20inches)
AB
C
D
Printing Area
(Back side)
Feed direction