Dell fi-412PR Scanner User Manual


 
fi-412PR Imprinter Operator’s Guide | 1
Introduction
Thank you for purchasing the fi-412PR Imprinter
option for fi-4120C2 Color Image Scanner.
This guide explains how to install and use the imprinter.
(For further details about the functions and operations of
fi-4120C2 Image Scanner, refer to the “fi-4120C2 Image
Scanner Operator’s Guide” included in fi-4120C2 Setup
CD-ROM.)
This guide also contains other important information, such
as procedures for replacement of consumables. Keep this
guide in a convenient and safe place so that you can refer
to it whenever necessary.
We hope this manual will be helpful in your future use of
the fi-412PR Imprinter
Manufacturer
PFU LIMITED
Image Products Sales Dept.
Imaging Products Division, Products Group
Solid Square East Tower
580 Horikawa-cho
Saiwai-ku, Kawasaki-shi
Kanagawa 212-8563
Japan
Phone: +81 (44) 540-4538
Trademarks
Microsoft, Windows, and Windows NT are registered
trademarks of Microsoft Corporation in the United States
and/or other countries.
Other product names are the trademarks or registered
trademarks of the respective companies.
How Trademarks Are Indicated In This Manual
References to operating systems (OS) are indicated as
follows:
Windows 95: Microsoft
®
Windows
®
95 operating system.
Windows NT 4.0:
Microsoft
®
Windows NT
®
Server operating
system version 4.0
Microsoft
®
Windows NT
®
Workstation operating
system version 4.0.
Windows 98: Microsoft
®
Windows
®
98 operating system.
Windows Me: Microsoft
®
Windows
®
Millennium Edition
operating system.
Windows 2000: Microsoft
®
Windows
®
2000 Professional
operating system.
Windows XP: Microsoft
®
Windows
®
XP Professional
operating system,
Microsoft
®
Windows
®
XP Home Edition
operating system.
Where there is no distinction between the different
versions of the above operating system, the general term
"Windows" is used.
Regulatory Information
FCC declaration
This equipment has been tested and found to comply
within the limits of a Class B digital device, pursuant to
Part 15 of the FCC Rules. These limits are designed to
provide reasonable protection against harmful interference
in a residential installation. This equipment generates, uses,
and can radiate radio frequency energy and, if not installed
and used in accordance with the instruction manual, may
cause harmful interference to radio communications.
However, there is no guarantee that interference will not
occur in a particular installation. If this equipment does
cause harmful interference to radio or television reception,
which can be determined by turning the equipment off and
on, the user is encouraged to try to correct the interference
by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase separation between equipment and receiver.
- Connect equipment to an outlet on a circuit different
from that to which the receiver is located.
- Consult your dealer or an experienced radio/TV
technician.
FCC Warning: Changes or modifications not expressly
approved by the party responsible for compliance could
void the user’s authority to operate the equipment.
Canadian DOC Regulations
This digital apparatus does not exceed the Class B limit for
radio noise emissions from digital apparatus set out in the
Radio interference Regulations of the Canadian
Department of Communications.
This Class B digital apparatus complies with Canadian
ICES-003.
Le pésent appareil numérique n’ément pas de bruits
radioélectriques dépassant les limites applicables aux
appareils numériques de la classe B prescridtes dans le
Réglesment sur le brouillage radioélectrique dicté par le
ministere des Communications du Canada.
Cet appareil numérique de la classe B est conformme à la
norme NMB-003 du Canada.
Bescheinigung des Herstellers / Importeurs
Hiermit wird bescheinigt, daß der/die/das
fi-412PR
In Übereinsstimmung mit den Bestimmungen der
EN45014(CE) funkentstört ist.
Laut Maschinenlärminformationsverordnung 3. GS
GV, 18.01.1991:Der höchste Schalldruckpegel beträgt
70 dB (A) order weniger gemäß ISO/7779.