Filter
Top Products
1. Follow the instructions in Before You Begin
2. Align the screw hole on the Bluetooth card with the screw hole on the system board.
3. Replace the screw that secures the Bluetooth card to the computer base.
4. Connect the Bluetooth-card cable to the connector on the system board.
5. Replace the palm-rest assembly (see Replacing the Palm-Rest Assembly).
6. Replace the keyboard (see Replacing the Keyboard).
7. Replace the center-control cover (see Replacing the Center-Control Cover).
8. Replace the battery pack (see Replacing the Battery Pack).
9. Replace the base cover (see Replacing the Base Cover).
Back to Contents Page
CAUTION: Before turning on the computer, replace all screws and ensure that no stray screws remain inside the computer. Failure to do so may
result in damage to the computer.