Filter
Top Products
System Setup 71
Advanced
CPU Type Displays the Type of Processor installed in the system.
CPU Speed Displays CPU Speed.
Cache L1, L2 Displays the amount of Cache RAM available.
Integrated
peripherals
(enabled
default)
Displays information about Serial ATA Configurations, and
enables/disables Serial ATA Configuration, HD Audio,
Onboard LAN and Onboard LAN Boot ROM.
PnP/PCI
Configurations
(PEG/IGD
default)
Permits selection of a primary graphics controller.
CPU
Configuration
(Enabled
default)
Enables/disables Intel SpeedStep
®
technology. When
Enabled is selected, CPU speed is controlled by the OS.
When disabled, the default CPU speed is used.
USB
Configuration
(Enabled
default)
Enables/disables the USB controller.
Power Management
ACPI Suspend
Type
(S3 default)
Sets the computer’s suspend mode. The options are S1, a
suspend state in which the computer is running in a low-
power mode, and S3, a suspend state in which the power is
reduced or turned off for many components, however, system
memory remains active.
Remote Wakeup
(Off default)
This option allows the system to power up when a network
interface controller receives a wake up signal.
Auto Power On
(disabled
default)
Enables/disables the Auto Power On function.