Filter
Top Products
Back to Contents Page
Display
Dell™Latitude™D531ServiceManual
Display Assembly
Display Bezel
Display Panel
Display Latch
Display Assembly
Removing the Display Assembly
1. Follow the instructions in Before Working Inside Your Computer.
2. Remove the two M2.5 x 5-mm screws (labeled "D") from the bottom of the computer.
3. Remove the hinge cover (see Removing the Hinge Cover).
4. Remove the keyboard (see Removing the Keyboard).
5. Remove the two M2.5 x 5-mm screws from the back of the computer.
6. Disconnect the display cable from the display cable connector on the system board.
7. Disconnect the Mini-Card antenna cables (see Removing the Mini-Card).
8. Lift the display out of the computer.
CAUTION: Before you begin the following procedure, follow the safety instructions in the Product Information Guide.
NOTICE: To avoid electrostatic discharge, ground yourself by using a wrist grounding strap or by periodically touching an unpainted metal surface, such
as the back panel on the computer.
NOTICE: Ensure that the display cable and the antenna cables do not get caught beneath the plastic tabs on the base of the computer.