Filter
Top Products
Back to Contents Page
Base
Dell™Latitude™D531ServiceManual
Removing the Computer Base
Replacing the Computer Base
Removing the Computer Base
1. Follow the instructions in Before Working Inside Your Computer.
2. Remove the fan (see Removing the Fan).
3. Remove the system board (see Removing the System Board Assembly).
Replacing the Computer Base
To install the base, follow the procedures in Replacing the System Board Assembly).
Back to Contents Page
CAUTION: Before you begin the following procedure, follow the safety instructions in the Product Information Guide.
NOTICE: To avoid electrostatic discharge, ground yourself by using a wrist grounding strap or by periodically touching an unpainted metal surface, such
as the back panel on the computer.
NOTE: When removing the system board to replace the computer base, it is not necessary to remove the processor, memory, or Mini-Card.
CAUTION: Before you begin the following procedure, follow the safety instructions in the Product Information Guide.
NOTICE: To avoid electrostatic discharge, ground yourself by using a wrist grounding strap or by periodically touching an unpainted metal surface, such
as the back panel on the computer.