Filter
Top Products
15. Replace the hard drive (see Replacing the Hard Drive).
16. Replace the media bay device (see Removing and Installing Media Bay Devices).
17. Turn on the computer.
18. Flash update the BIOS (see Flashing the BIOS for more information).
19. Enter the system setup program to update the BIOS on the new system board with the computer Service Tag.
Back to Contents Page
NOTICE: Before turning on the computer, replace all screws and ensure that no stray screws remain inside the computer. Failure to do so may result in
damage to the computer.
NOTE: If you use a BIOS update program CD to flash the BIOS, press <F12> before inserting the CD in order to set the computer to boot from the CD
for one time only. Otherwise, you must enter the system setup program to change the default boot order.