Filter
Top Products
Adding and Replacing Parts 169
Optical Drive
CAUTION: Before you begin any of the procedures in this section, follow the
safety instructions in the Product Information Guide.
Removing the Optical Drive
1
Follow the procedures in "Before You Begin" on page 163.
2
Turn the computer over.
3
Remove the locking screw from the optical drive.
4
Using a plastic scribe, push the notch to release the optical drive from the
bay.
5
Slide the optical drive out of the bay.
1 foam packaging 2 hard drive
2
1
book.book Page 169 Wednesday, September 16, 2009 11:12 AM