Dell
PowerEdge T110 II Technical Guide 16
4.10 LED Control Panel
Figure 6 shows the LED control panel located on the front of the T110 II system.
Figure 6. LED Control Panel
For a complete description of LED indicators, their causes, and possible courses of action to take to
resolve an error, see the Diagnostic Lights (Optional) section in the About Your System chapter in the
PowerEdge T110 II Systems Owner’s Manual on Support.Dell.com.
4.11 Security
For additional information regarding the following security features, see the PowerEdge T110 II
Systems Owner’s Manual on Support.Dell.com.
4.11.1 Cover Latch
The PowerEdge RT10 II comes with a lockable entry latch on the side cover of the unit and provides
security for the entire system. The latch provides for toolless access to the chassis.
4.11.2 Bezel
The bezel is a one piece plastic bezel that cannot be removed from the front of the chassis.
4.11.3 Hard Drive
The hard drives are secured by the lockable cover latch on the side of the system.
4.11.4 TPM
The Trusted Platform Module (TPM) is used to generate and store keys, protect and authenticate
passwords, and create and store digital certificates. The TPM can also be used to store Microsoft
®
BitLocker™ keys for hard drive encryption features in Microsoft Windows Server
®
2008. TPM is
enabled through a BIOS option.
4.11.5 Power Off Security
There is a setting in the CMOS setup that disables the power button function.
4.11.6 Intrusion Alert
A switch mounted on the inside of the chassis detects chassis intrusion. When the cover is opened,
the switch circuit closes to indicate intrusion.
4.11.7 Secure Mode
BIOS has the ability to enter a secure boot mode through Setup. This mode includes the option to
lock out the power or set up a system password.
For more information, see System and Setup Password Features section in the About Your System
chapter in the PowerEdge T110 II Systems Owner’s Manual on Support.Dell.com.