Filter
Top Products
Dell
PowerEdge T110 II Technical Guide 24
7 Memory
7.1 Overview
The PowerEdge T110 II supports DDR3 memory, providing a high performance, high-speed memory
interface capable of low latency response and high throughput. The T110 II supports Unbuffered ECC
DDR3 DIMMs (UDIMM).
Key features of the T110 II memory system include:
2 channels per processor
Support for Unbuffered (UDIMM) ECC DDR3 DIMMs
DDR3 speeds of 1066/1333 MHz
4 DIMM sockets (32 GB maximum capacity)
Support for single-rank and dual-rank DIMMs
7.2 DIMMs Supported
The T110 II supports the following DIMM types:
1 GB, DDR3 UDIMM, 1333 with ECC
2 GB, DDR3 UDIMM, 1333 with ECC
4 GB, DDR3 UDIMM, 1333 with ECC
8 GB, DDR3 UDIMM, 1333 with ECC
7.3 DIMM Slots
The PowerEdge T110 II has four 72-bit (240-pin) DIMM slots for memory, supporting up to 2 DIMMs per
channel. The modules are configured as 72 bits wide to provide for ECC. The memory controller in
the CPU performs the ECC.
7.4 Speed
The PowerEdge T110 II supports 1066 MHz and 1333 MHz DDR3 memory.
7.5 Sparing
Memory sparing is not supported.
7.6 Mirroring
Memory mirroring is not supported.
7.7 RAID
Memory RAID is not supported.
7.8 Supported Configurations
Supported memory configurations for the T110 II are listed in Table 9. For the latest information on
memory options, visit Dell.com.