Filter
Top Products
4. Perform the following steps as shown in the illustration:
a. Disconnect the processor-fan cable from the connector on the system board [1].
b. Remove the screws that secure the processor fan to the system board [2].
c. Lift the processor fan away from the computer [3].
Installing the Processor Fan
1. Place the processor fan on the computer and tighten the screws to secure the processor fan to the
system board.
2. Connect the processor-fan cable to the connector on the system board.
3. Connect the power-supply cable to the connector on the system board and thread the cable on the
hooks in the computer.
4. Install:
a. system-board shield
b. VESA mount bracket
c. back cover
d. VESA stand
5. Follow the procedures in After Working Inside Your Computer.
Removing the Power-Supply Fan
1. Follow the procedures in Before Working Inside Your Computer.
2. Remove the:
a. VESA stand
b. back cover
c. VESA mount bracket
d. system-board shield
26