Filter
Top Products
Option Description
NOTE: The default option might differ based on the operating
system of your computer.
• Boot List Option - The list options are Legacy and UEFI. By default, the
option UEFI is selected.
NOTE: The default option might differ based on the operating
system of your computer.
• Add Boot Option - Enables you to add a boot option.
• Delete Boot Option - Enables you to delete an existing boot option.
• View - Enables you to view the current boot option in the computer.
• Load Defaults - Restores the default settings of the computer.
• Apply - Enables you to apply the settings.
• Exit - Exits and starts the computer.
Advanced Boot Options
The Enable Legacy Option ROMs option will allow the legacy option ROMs
to load, when in UEFI boot mode. Without this option, only UEFI option
ROMs will load. This option is required for Legacy boot mode. This Legacy
boot mode is not allowed when you enable the Secure Boot. By default,
the
Enable Legacy Option ROMs check-box is not selected. The other
options are:
• Load Defaults - Restores the default settings of the computer.
• Apply - Enables you to apply the settings.
• Exit - Exits and starts the computer.
Date/Time Allows you to set the date and time. The changes to the system date and
time takes effect immediately.
Table 3. System Configuration
Option Description
Integrated NIC
If you enable UEFI network stack, UEFI network protocols will be available.
UEFI network allows pre-os and early os networking features to use NICs
that are enabled. This may be used without PXE turned on. When you
enable Enabled w/PXE, the type of PXE boot (Legacy PXE or UEFI PXE)
depends on the current boot mode and type of option ROMs in use. The
UEFI Network Stack is required in order to have UEFI PXE functionality fully
enabled.
• Enabled UEFI Network Stack - This option is disabled by default.
Allows you to enable or disable the integrated network card. You can set
the integrated NIC to:
• Disabled
• Enabled
• Enabled w/PXE - This option is enabled by default.
• Enabled w/Cloud Desktop
NOTE: Depending on the computer and its installed devices, the items
listed in this section may or may not appear.
SATA Operation
Allows you to configure the operating mode of the integrated SATA hard
drive controller.
• Disabled - The SATA controllers are hidden.
44