Dell W030 Laptop User Manual


 
Option Description
Password Bypass Allows you to bypass the System Password and the internal HDD password
prompts during a system restart.
Disabled - Always prompt for the system and internal HDD password
when they are set. This option is enabled by default.
Reboot Bypass - Bypass the password prompts on restarts (warm
boots).
NOTE: The system will always prompt for the system and internal
HDD passwords when powered on from the off state (a cold boot).
Also, the system will always prompt for passwords on any module bay
HDDs that may be present.
Password Change Allows you to determine whether changes to the system and hard disk
passwords are permitted when an administrator password is set.
Allow Non-Admin Password Changes - This option is enabled by
default.
TPM Security This option lets you control whether the Trusted Platform Module (TPM) in
the system is enabled and visible to the operating system.
TPM Security - This option is disabled by default.
If you enable TPM Security , following options will be displayed.
TPM ACPI support
TPM PPI Deprivation Override
Deactivate
Active
Clear
TPM PPI Provision Override are shown
NOTE: Activation, deactivation, and clear options are not affected if
you load the setup program's default values. Changes to this option
take effect immediately.
Computrace (R)
This field lets you activate or disable the BIOS module interface of the
optional Computrace Service from Absolute Software.
Deactivate - This option is enabled by default.
Disable
Activate
Chassis Intrusion This field controls the chassis intrusion feature. The options are:
Clear intrusion warning - This option will be displayed whenEnable and
On-Silentoptions are selected. This option is disabled by default.
Disable
Enable - This option is enabled by default.
On-Silent
CPU XD Support Allows you to enable or disable the execute disable mode of the processor.
Enable CPU XD Support - This option is enabled by default.
47