Filter
Top Products
CANopen Communication Module DVPCOPM-SL
DVP-PLC Application Manual
18
registers in DVP-SV from the Output Table and Input Table below. Click on “OK” to complete setting
up the node list.
z Downloading the data to the master
Select “Network“ => “Download” to download the configuration data to DVPCOPM-SL master. If
the PLC is in RUN status at this moment, you will be given a warning saying that you have to stop the
operation before the download.
Click on “OK” to stop the PLC and start to download the data to the master.
After the download is completed, you will be given another warning, asking you if you would like to
run the PLC again. Click on “OK” to restart the PLC program, or click on “Cancel” to stop the PLC.