Filter
Top Products
Terminal Setup
To set these addresses from the
Settings menu, click on Servers and then click on Add.
Enter the name of each server, its IP Address and IP port (normally 23 for Telnet
servers), and emulation type. Then click on
OK.
Repeat this step for each Telnet server the terminals are required to access. If an error is
made in the name, IP Address, IP Port number, or Terminal emulation type, click on the
line that is in error and then click on the
Edit button to make the corrections. Use the
Load button if you want to load an .svr file and use the Save As button if you want to
save your file as an. svr file.
Setting Terminal Model and COM Port
The default serial connection to the Denso cradle is through COM1. To select a specific
Denso terminal model and keypad, or to change the
COM port assignment, click on the
Options menu as shown.
To maintain compatibility with existing Denso Telnet client keyboard layouts, a specific
terminal model and keypad must be selected from the Terminal Model window.
Supported Equipment Manual • March, 2006
2-6