Filter
Top Products
37
Chapter 2. Getting Started the BHT and System Mode
2.5 Operating in System Mode
System Mode is an operating software exclusively designed for the effective use of the
BHT, which includes various functions as shown on the following pages.
2.5.1 Starting System Mode
To start up System Mode, turn the BHT power on while holding down the SF and 1
keys. This operation calls up the SYSTEM MENU on the LCD as shown below.
The function selected is highlighted (white-on-black) with the cursor. To select a
desired item in System Mode, press the corresponding numerical key and then press
the ENT key.
The keys below are so designed that the function of each key is consistent in every
screen.
Numerical keys Pressing a numerical key corresponding with a desired
menu number selects the desired item displayed on the
screen.
ENT key Pressing this key registers the selected item and executes
the corresponding function.
Pressing the
or key moves the cursor up or down,
respectively, to select a desired item.
Pressing the
or key moves the cursor to the left or
right, respectively, to select a desired setting.
and keys
and keys
SYSTEM MENU
1:EXECUTE PROGRAM
2:DOWNLOAD
3:UPLOAD
4:SET SYSTEM
5:TEST
6:VERSION
7:FTP
8:RF
("7:FTP" and "8:RF" supported
by the BHT-7500S/7500W only)
The C key is inoperative on the SYSTEM MENU. On other screens, pressing the C
key returns to the immediately preceding screen.
The power-on default is "EXECUTE PROGRAM" which is highlighted. Once any other
item is selected, the selected item will become highlighted with the cursor when you
turn back to the SYSTEM MENU.