Filter
Top Products
47
Chapter 2. Getting Started the BHT and System Mode
Data that can be copied from one BHT to another BHT
The copying function between BHTs copies the following set data:
LCD contrast level
Beeper volume
Switching between beeper and vibrator
Execution program to be run automatically when the BHT is turned on
Message version (English or Japanese)
Display font size
Date
Time
Setting of black-and-white inverted label reading function
Decode level
Minimum number of digits to be read for ITF
Minimum number of digits to be read for STF
Minimum number of digits to be read for Codabar (NW-7)
Interface port to be used in user programs
Interface port to be used in System Mode
Communications parameters for the optical interface
Communications parameters for the direct-connect interface
Communications protocol options for the optical interface
Communications protocol options for the direct-connect interface
Communications protocol type
Shift key function defined
M1 key function defined
M2 key function defined
M3 key function defined
M4 key function defined
Resume function
IP address of FTP server
User name of FTP server
Password of FTP server
Default directory for FTP server
FTP option, Line delimiters (CR/LF)
FTP option, Treatment of line delimiters
FTP option, Treatment of trailing spaces in data filelds
FTP option, Upload mode
FTP option, Verbose mode
IP address of host computer for ping
Data size of echo request
Echo request intervals
Timeout period for echo request
No. of echo requests to be sent
Echo request send timing
Setting of remote wakeup
Transmission speed for remote wakeup
CPU performance
Domain BHT-7500S only
Security ID BHT-7500S only
Service Set ID (SSID) BHT-7500W only
Power save mode for wireless module BHT-7500W only
Authentication system BHT-7500W only
WEP (Wired Equivalent Privacy) BHT-7500W only