Filter
Top Products
Dialogic® 3000 and 4000 Media Gateway Series Quickstart Guide
page 17
SIP Configuration
The SIP settings are configured in the Dialogic
®
Diva
®
SIPcontrol
TM
software configuration tool.
Note: The graphics of the basic SIP configuration show the settings for a Dialogic
®
3000 Media Gateway Series.
1. To open the tool, click Start > Programs > Dialogic Diva > SIPcontrol Configuration.
Note: If you need help configuring the Dialogic
®
Diva
®
SIPcontrol
TM
software settings:
• click the respective parameter in the configuration tool to open a window with the help text, or
• refer to the Dialogic
®
3000 and 4000 Media Gateway Series Reference Guide that provides a
detailed description of all parameters.
2. Under PSTN Interface Configuration, the controllers of the Dialogic
®
Diva
®
Media Board are listed and
enabled by default. Click the check boxes under Enabled to disable the controllers you do not use. See the
graphics of the Dialogic
®
Media Gateway rear panels under Installation on page 11 to identify which port
corresponds to which controller.
3. Go to Network Interface Configuration and set the SIP Listen Port to:
• 5060 if:
• you use a Dialogic
®
3000 Media Gateway with Microsoft
®
Exchange Server 2007, or
• you use a Dialogic
®
4000 Media Gateway and the Microsoft
®
Mediation Server is not installed on the
Media Gateway.
• 9803 if you use a Dialogic
®
4000 Media Gateway and the Microsoft
®
Mediation Server is installed on the
Dialogic
®
Media Gateway.
Check the Enabled box of your Ethernet adapter.