Filter
Top Products
199
Monitor and manage Digi devices
info
The info command displays statistical information about a device over time. The statistics
displayed are those gathered since the tables containing the statistics were last cleared.
The info command keywords displays the following types of statistics:
Device statistics. info device displays such details as product, MAC address,
boot, POST, and firmware versions, memory usage, utilization, and uptime.
Ethernet statistics. info ethernet displays statistics regarding the Ethernet
interface, including the number of bytes and packets sent and received, the
number of incoming and outgoing bytes that were discarded or that contained
errors, the number of Rx overruns, the number of times the transmitter has been
reset, and the number of incoming bytes when the protocol was unknown.
ICMP statistics. info icmp displays the number of messages, bad messages,
and destination unreachable messages received.
Serial statistics. info serial displays the number of bytes received and
transmitted, signal changes, FIFO and buffer overruns, framing and parity
errors, and breaks detected.
TCP statistics. info tcp displays the number of segments received or sent, the
number of active and passive opens, the number of bad segments received, the
number of failed connection attempts, the number of segments retransmitted,
and the number of established connections that have been reset.
UDP statistics. info udp displays the number of datagrams received or sent,
bad datagrams received, and the number of received datagrams that were
discarded because the specified port was invalid.
To display mobile statistics, use display mobile instead of info.