Filter
Top Products
125
Configure Digi devices
Mobile connection settings
Mobile connection settings configure how the mobile connection is established and
maintained.
Re-establish connection when no data is received for a period of time:
Inactivity timeout: Whether the mobile connection will be disconnected and
re-established after no data has been received over the link for the specified
amount of time, in seconds.
Digi SureLink™ settings
The Mobile Connection Settings configure Digi SureLink™ settings for a Digi device.
SureLink ensures that a Digi device is in a state where it can connect to the mobile
network, and they can be used to monitor the integrity of the established mobile
connection.
There are two groups of SureLink settings:
Hardware Reset Thresholds: These settings can be configured to clear any
error states that were resident in the Digi device’s cellular module, so the
device can once again connect to the network, if the connection is lost. It does
this by first resetting the cellular module after a default or specified number of
consecutive failed connection attempts, and then resetting the Digi device after
a default or specified number of failed consecutive connection attempts. Each
of these connection-failure settings can be disabled as well.
Link Integrity Monitoring settings: These settings can be configured to
perform a selected test to examine the functional integrity of the network
connection, and take action to recover the connection in the event that it is lost.