Filter
Top Products
65
Configure Digi devices
4 The Digi Device Setup Wizard automatically starts. Select the appropriate platform
and click Next.
The Digi device discovery utility finds and lists all of the Digi devices on the
network.
5 Locate the Digi device by its MAC address.
6 Select the Digi device and click Next.
7 Follow the instructions in the wizard to assign an IP address for the Digi device.
Use the online help supplied with the wizard for information about values and
selections on the wizard screens.
Configure an IP address using DHCP
A IP address can also be configured using Dynamic Host Configuration Protocol (DHCP).
If desired, set up a permanent entry for the Digi device device on a DHCP server. While
this is not necessary to obtain an IP address via DHCP, setting up a permanent entry means
the IP address is saved when the device is rebooted. For more information on DHCP
server configuration, see "DHCP server settings" on page 77.
Configure an IP address using Auto-IP
The standard protocol Automatic Private IP Addressing (APIPA or Auto-IP) assigns the
IP address from the reserved IP addresses in Auto-IP. Use ADDP or DHCP to find the
device and assign it a new IP address that compatible with your network. Once the unit is
plugged in, Auto-IP automatically assigns the IP address.