Filter
Top Products
Monitoring capabilities from the command line
204
display mesh
The display mesh command refreshes the display of Mesh network devices, and displays
specific information about Mesh network devices.
Command syntax is:
display mesh [options...]
options:
refresh {Discover network devices}
address=device address {Specify device to display}
For example, here are two display mesh commands. The first one displays the Mesh
network device list. The second displays information about one of the routers in the list.
#> display mesh
Mesh network device list
PAN ID: 0x007a
Channel: 18
Gateway address: 00:0d:6f:00:00:06:89:37!
Device address Node Parent Manufacturer Profile Label
------------------------ ---- ------ ------------ ------- -----
COORDINATOR
00:0d:6f:00:00:06:89:37! 0000 fffe 101e c105 Coordinator
ROUTERS
00:0d:6f:00:00:06:89:31! 8e3e fffe 101e c105 XBEE-RTR-PWRCTL-R
00:0d:6f:00:00:0c:c9:7a! 93b1 fffe 101e c105 XBEE-RS485
00:13:a2:00:40:0a:09:35! fe0a fffe 101e c105 XBEE-RTR-PWRCTL-L
END NODES
To display device details:
display mesh address=(device address)