Filter
Top Products
DGS-3100 Series Firmware Release Notes
13
4
When user is copying and pasting a group of long commands,
some of the commands will not work.
5 When typing: ‘show fdb aging time’ and ‘?’ afterwards system will
display other options. Actually, there shouldn’t be additional
values in this command
6 When user deletes access profile through the web, the profile
details will remain.
7 Users can not configure more than 5 user accounts via the Web UI.
8 When user configures ACLs on the Web UI, the system will not
check the TCP Flag parameter which is configured as “unset (0)”
and will only check the parameter “set (1)”.
9 When pasting commands, the prompt will be displayed in the
wrong position.
10 When configuring MAC_base_access_control and copying the
configuration file to TFTP server. The function will not work when
user restore the configuration file back to the switch.
11 If the user configures a port to guest VLAN and also configures the
port as untagged in the same VLAN, the port will not belong to any
VLAN after the user changes the “port control” to “force
authorize” state..
12 When user tries to create an IP access profile with mask of all “0”
The system will accepted it.
v1.00.36
(DGS-3100-24/48)
v1.00.37
(DGS-3100-24P/48P)
First release
* D-Link tracking number is enclosed in ()
Known Issues:
Firmware
Version
Issues
Workaround
v3.60.28 None
v3.50.23 None
v3.00.43
The
LLDP TLV information, the
“
Port ID
”
and
“Port ID Subtype”, displays Hex string in
Web UI instead of displaying alphanumeric
one. (DI20090330000015)
User can see alphanumeric string
in CLI.
v2.50.43 None
v2.00.47
1 It is impossible to activate the third
web session
T
wo web sessions work properly
within the stack, in standalone
mode there is no problem at all.
2
It
is
possible to configure the stacking
port (port 49, 50) as LACP port.
The stacking port will still be a
stacking even though it was