D-Link 3.60.28 Switch User Manual


 
DGS-3100 Series Firmware Release Notes
9
rlphysdescription.mib
rlVlanTrunking.mib Support VLAN Trunking
ianaifty.mib Modify this mib file to follow RFC 1573
which is used as the syntax of the
ifType object in the (updated)
definition of MIB-II's ifTable.
rlinterfaces_recovery.mib Support the recovery option when loop
is detected
policy.mib Support time-based ACL configuration
rlbrgmulticast.mib Support IGMP Snooping querier
rlSafeGuard.mib Support configuring threshold
v2.00.47
None
v1.00.36
(DGS-3100-24/48)
v1.00.37
(DGS-3100-24P/48P)
First release. Please refer to datasheet for supported SNMP MIB files.
Changes of Command Line Interface:
The section below only shows command line changes that may bring backward compatibility
issues with configuration settings for previous version of firmware.
Any new feature commands that do not have backward compatibility issues are not included in the
below section.
Fireware Version
New Features
v3.60.28
1
Modify
config traffic control
comma
nd to support Broadcast Storm
Control feature
l config traffic control {[<portlist> | all] state [enable | disable]
| storm_type [broadcast | multicast_broadcast |
dlf_multicast_broadcast ] threshold <int 3500-1000000>
action [drop | shutdown] time_interval <value 5-30>
v3.50.23
1
Modify
config firmware
command to support deleting image
feature
l config firmware [delete | boot_up] {unit <unit_id 1-6>}
image_id <init 1-2>
2 Modify “create trusted_host” command to support Trusted Host by
application feature
l create trusted_host <ipaddr>{network <network_address>}
{application [telnet | ssh | snmp | http | https | ping |
all}