Filter
Top Products
DSL-604+ ADSL Ethernet Router User’s Guide
2
Static Routing
This allows you to select a data path to a particular network destination that will remain in the routing table and
never “age out”. If you wish to define a specific route that will always be used for data traffic from your LAN to
a specific destination within your LAN (for example to another router or a server) or outside your network (to a
ISP defined default gateway for instance).
Default Routing
This allows you to choose a default path for incoming data packets for which the destination address is unknown.
This is particularly useful when if the Router functions as the sole connection to the Internet.
ATM (Asynchronous Transfer Mode)
The DSL-604+ supports Bridged Ethernet over ATM (RFC1483), IP over ATM (RFC1577) and PPP over ATM
(RFC 2364). The Router can support up to eight Virtual Circuit Connections (VCCs).
Precise ATM Traffic Shaping
Traffic shaping is a method of controlling the flow rate of ATM data cells. This function helps to establish the
Quality of Service for ATM data transfer.
G.hs (Auto-handshake)
This allows the Router to automatically choose either the G.lite or G.dmt ADSL connection standards.
High Performance
Very high rates of data transfer are possible with the Router. Up to 8 Mbps downstream bit rate using the G.dmt.
Full Network Management
The DSL-604+ incorporates SNMP (Simple Network Management Protocol) support for web-based
management and text-based network management via an RS-232 or Telnet connection.
Telnet Connection
The Telnet enables a network manager to access the Router’s management software remotely.
Easy Installation
The DSL-604+ uses a web-based graphical user interface program for convenient management access and easy
set up. Any common web browser software can be used to manage the Router.
Wireless Features
• Fully IEEE 802.11b compatible.
• Wireless data rate up to 22 Mbps
• Direct Sequence Spread Spectrum technology
• Operating in the unlicensed 2.4 GHz ISM band
• Supports 64/128/256 bits WEP security and user authentication
• Efficient antenna provides a range of per cell operation up to 100 meter indoor