Filter
Top Products
DSL-604+ ADSL Ethernet Router User’s Guide
16
Access the Configuration Manager
Now that your computer’s IP settings allow it to communicate with the Router, you can access the configuration
software.
Note
Be sure that the web browser on your computer is not configured to use a proxy
server in the Internet settings. In Windows Internet Explorer, you can check if a
proxy server is enabled using the following procedure:
1. In Windows, click on the START button, go to Settings and choose Control
Panel.
2. In the Control Panel window, double-click on the Internet Options icon.
3. Click the Connections tab and click on the LAN Settings button.
4. Verify that the “Use proxy server” option is NOT checked. If it is checked,
click in the checked box to deselect the option and click OK.
Alternatively you can access this Internet Options menu using the Tools pull down
menu in Internet Explorer.
To use the web-based management software, launch a suitable web browser and direct it to the IP address of the
Router. Type in http:// followed by the default IP address, 192.168.0.1 in the address bar of the browser. The
URL in the address bar should read: http://192.168.0.1.
In the page that opens, click on the Login button.
Figure 3- 1. Login Page
A new window will appear and you will be prompted for a user name and password to access the web-based
manager. Use the default user name admin and password admin for first time set up. You should change the
web-based manager access user name and password once you have verified that a connection can be established.
The user name and password allows any PC within the same subnet as the Router to access the web-based
manger.
Login
here