D-Link DES-1210-28 Switch User Manual


 
6 Command Line Interface D-Link Web Smart Switch User Manual
Parameter Description
<passwd>
The new password of the administrator.
Example
DES-1210-28P> config account admin password admin
DES-1210-28P>
Figure 121 – The config account admin password command
Save
The command saves the configuration changes to the memory.
Syntax
save
Example
DES-1210-28P> save
Building configuration ...
[OK]
DES-1210-28P>
Figure 122 – The save command
Debug info
This command displays the ARP table and MAC FDB of the Switch.
Syntax
debug info
Example
DES-1210-28P> debug info
% ARP table :
Address Hardware Address Type Interface Mapping
------- ---------------- ---- --------- -------
172.17.5.85 00:18:8b:bf:75:30 ARPA vlanMgmt Dynamic
172.17.5.254 00:19:5b:14:3d:c4 ARPA vlanMgmt Dynamic
% MAC table :
Vlan Mac Address Type Ports
---- ----------- ---- -----
1 00:00:00:00:00:26 Learnt Fa0/4
1 00:00:48:bf:f3:01 Learnt Fa0/4
1 00:03:1b:66:66:5c Learnt Fa0/4
1 00:03:64:00:01:23 Learnt Fa0/4
1 00:0d:60:cb:6e:5d Learnt Fa0/4
1 00:0e:7b:a0:12:97 Learnt Fa0/4
1 00:0f:3d:a8:88:9b Learnt Fa0/4
1 00:0f:ea:f0:0e:1e Learnt Fa0/4
1 00:10:db:73:68:31 Learnt Fa0/4
1 00:11:25:2c:43:c6 Learnt Fa0/4
1 00:11:25:43:38:83 Learnt Fa0/4
Total Mac Addresses displayed: 11
DES-1210-28P>
Figure 123 – The debug info command
7
7
1
1