D-Link DFL-600 Network Router User Manual


 
IP Address Settings and Computer Settings
In order to install the DFL-600 you will need to check your computer’s
settings and the values from your ISP.
The information offered by your ISP:
Dynamic IP settings
Your fixed IP address for the gateway
Your subnet mask for the gateway
Your default gateway IP address
Your DNS IP address
If you would like to use PPPoE, you will need the following values from your
ISP in order to install your router:
User Name
Password
The static IP settings for the PC:
Your PC’s fixed IP address
Your PC’s subnet mask
Your PC’s default gateway
Your PC’s primary DNS IP address
Note: The router’s default IP address setting is 192.168.0.1, with a subnet
mask of 255.255.255.0.
Dynamic IP Settings:
It is recommended that you allow your PC’s IP settings be automatically assigned by
a DHCP server. By default, your new DFL-600 VPN Firewall functions as a DHCP
server, and it will give your PC the necessary IP settings, every time you boot your
PC.