Filter
Top Products
ilename to the new
cal hard drive. For
ple, if the file is in the root directory of
\newfile.had and click the
ile transfer.
Update File
Enter the full DOS path and f
firmware file on your lo
exam
your C drive, enter C:
OK button to begin the f
Browse
firmware file on your local
Browse button to open a W
window to look for this file.
If you are unsure about the location of the new
hard drive, click the
indows Explorer
Tools − Ping
Ping is a small program that will send a series of test packets to a network
device and ask for the device to send the packets back to the source. It is
ery useful to determine if a given network device is properly connected to
ter the
(three is
v
the network and is operating properly.
To ping an IP address, enter the IP address in the IP address field, en
number of packets you want to send in the Count number field
usually sufficient) and click the Apply button. The results will be displayed
in the field with a scroll bar to the right, as shown below.