Filter
Top Products
Using the Configuration Interface
36 D-Link Systems, Inc.
Access Control Rules List
This section shows the current Access Control rules. Any device that does not have a rule, cannot
access the Internet. Entries can be modified by clicking on the paper and pencil icon. To delete an
entry, click on the trash can icon. After you’ve completed all modifications or deletions, you must click
the Save Settings button at the top of the page to save your changes. The router must reboot before
new settings will take effect. You will be prompted to Reboot the Device or Continue. If you need to
make additional settings changes, click Continue. If you are finished with your configuration settings,
click the Reboot the Device button.
Web Filter
The Web Filter section is where you add the Web site to be used for Access Control.
Add/Edit Web Site
This field is where you can add Web sites to the Allowed Web List. The Allowed Web List is used for
systems that have the Web filter option enabled in Access Control.
Entries in the Allowed Web Site List can be activated or deactivated with
this checkbox. New entries are activated by default.
Enter the URL (address) of the web site that you want to allow (such as
google.com). Enter the most inclusive domain name. For instance, entering
dlink.com will give you access to www.dlink.com and support.dlink.com. Do
not enter the http:// preceding the URL.
Note: Many web sites construct pages with images and content from other
web sites. Access will be forbidden if you do not enable all of the web sites
used to construct a page. For example, to access my.yahoo.com, you must
enable access to yahoo.com, yimg.com, and doubleclick.net.
Saves the new or modified Allowed Web Site in the Allowed Web Site List.
When you are done editing the settings, you must click the Save Settings
button at the top of the page to make the changes effective and permanent.
Allowed Web Site List
This section lists the currently allowed web sites. Entries can be modified by clicking on the paper
and pencil icon. To delete an entry, click on the trash can icon. After you’ve completed all modifications
or deletions, you must click the Save Settings button at the top of the page to save your changes.
The router must reboot before new settings will take effect. You will be prompted to Reboot the
Device or Continue. If you need to make additional settings changes, click Continue. If you are
finished with your configuration settings, click the Reboot the Device button.
Enable:
Web Site:
Save:
Advanced > Web Filter